输入电抗器
    时间:2020-05-08
    所属分类:输入电抗器

      输入交流电抗器 Input AC Reactor


      产品概述 Product Profile


      输入交流电抗器接在电源和变频器之间的,它能限制电网电压突变和操作过电压引起的电流冲击,有效的保护变频器并能够改善变频器的功率因数,抑制变频器输入电网的谐波电流; 输入交流电抗器限制以谐波形式出现的电路反馈。它们还可以降低因为转换直流连接电容器中的输入整流器而导致的交流电流及其频率。


      The input AC reactor is connected between the power supply and the inverter. It can limit the sudden change of the grid voltage and the current surge caused by the operation overvoltage. It can effectively protect the inverter and improve the power factor of the inverter and suppress the harmonic input of the inverter. Wave current; Input AC reactor limits circuit feedback in the form of harmonics. They also reduce the AC current and its frequency due to the input rectifier in the DC-connected capacitor.


    上一篇:输出电抗器

    结构特点 Construction Features
    1.铁芯采用优质硅钢片,芯柱经多个气隙分成均匀小块,气隙采用高温高强度粘接胶将芯柱的每个小段与上、下铁轭紧密粘接起来,铁芯端面采用高品质防锈漆喷涂工艺,解决了电抗器铁芯表面生锈问题。在运行中大大减小了噪音和振动。

    The core is made of high-quality silicon steel sheet, and the core column is divided into uniform small pieces through multiple air gaps. The air gap is made of high-temperature high-strength adhesive glue to tightly bond each small section of the core column with the upper and lower iron yokes. The end face adopts high-quality anti-rust paint spraying process to solve the problem of rust on the surface of the reactor core. Noise and vibration are greatly reduced during operation.


    2.电抗器均采用真空浸漆工艺,经高温热烘固化。线圈有良好的绝缘性能,整体机械强度高,防潮性能好线圈采用F、H级绝缘系统,大大提高了长期运行的可靠性。The reactors are all vacuum-dipped and cured by high temperature heat curing. The coil has good insulation performance, high overall mechanical strength, and good moisture resistance. The coil adopts F and H insulation system, which greatly improves the reliability of long-term operation.


    3.温升低,损耗小,成本低,综合利用率高。体积小,重量轻,占用空间小,便于安装。    

    Low temperature rise, low loss, low cost and high comprehensive utilization. Small size, light weight, small footprint and easy to install.

    性能参数 Performance Parameters
    1、额定工作电压: 380V/50Hz或660V/50Hz

    Rated working voltage: 380V/50Hz or 660V/50Hz.
    2、额定工作电流:5A至1600A@40℃

    Rated working current: 5A to 1600A@40°C.

    3、抗电强度: 铁芯-绕组 3500VAC/50Hz/10mA/10s无飞弧击穿

    Electric strength: Iron core-winding 3500VAC/50Hz/10mA/10s without arcing breakdown
    4、绝缘电阻: >100MΩ Insulation resistance: >100MΩ
    5、电抗器噪音:  <55dB  Reactor noise: <55dB.
    6、防护等级: IP00 protection level: IP00.
    7、绝缘等级: F/H级  Insulation grade: F / H grade.
    8、产品执行标准:GB10229-88电抗器 /JB9644-1999半导体电气传动用电抗器

     product implementation standards: GB10229-88 reactor / JB9644-1999 semiconductor electrical transmission reactor.

    型号含义 Model Description


    产品型号及技术参数:电抗器基准压降UD=2% 

    电抗器型号

    图号

    适配功率
    KW

    额定电流
    A

    压降
    V

    电感
    mH

    重量
    Kg

    外型尺寸

    安装尺寸

    L

    W

    H

    A

    B

    安装孔

    ACL-5-2.8

    A

    1.5

    5

    4.4

    2.8

    2.8

    120

    90

    130

    80

    60

    8×12

    ACL-10-1.4

    2.2

    10

    4.4

    1.4

    3.2

    150

    90

    150

    80

    60

    8×12

    ACL-15-0.934

    3.7

    15

    4.4

    0.934

    3.5

    150

    100

    155

    80

    60

    8×12

    ACL-15-0.934

    5.5

    15

    4.4

    0.934

    3.5

    150

    100

    155

    80

    60

    8×12

    ACL-20-0.7

    7.5

    20

    4.4

    0.7

    3.8

    150

    100

    155

    80

    65

    8×12

    ACL-30-0.467

    B

    11

    30

    4.4

    0.467

    6.2

    185

    120

    155

    95

    70

    8×12

    ACL-40-0.35

    15

    40

    4.4

    0.35

    6.8

    185

    125

    155

    95

    70

    8×12

    ACL-50-0.28

    18.5

    50

    4.4

    0.28

    7.0

    185

    130

    155

    95

    70

    8×12

    ACL-60-0.233

    22

    60

    4.4

    0.233

    7.8

    185

    135

    155

    95

    80

    8×12

    ACL-80-0.175

    30

    80

    4.4

    0.175

    12

    235

    145

    180

    170

    85

    10×20

    ACL-110-0.127

    37

    110

    4.4

    0.127

    12.6

    235

    150

    180

    170

    85

    10×20

    ACL-125-0.112


    45

    125

    4.4

    0.112

    13

    235

    155

    180

    170

    85

    10×20

    ACL-150-0.0934

    C

    55

    150

    4.4

    0.0934

    14

    210

    150

    210

    150

    95

    7×16

    ACL-200-0.07

    75

    200

    4.4

    0.07

    15

    210

    150

    210

    150

    95

    7×16

    ACL-250-0.056

    90

    250

    4.4

    0.056

    23

    250

    160

    240

    170

    110

    9×20

    ACL-275-0.051

    110

    275

    4.4

    0.051

    24

    250

    160

    240

    170

    110

    9×20

    ACL-330-0.042

    132

    330

    4.4

    0.042

    25

    250

    165

    240

    170

    110

    9×20

    ACL-450-0.031

    160

    450

    4.4

    0.031

    27

    250

    170

    290

    170

    110

    9×20

    ACL-500-0.028

    200

    500

    4.4

    0.028

    28

    250

    180

    290

    170

    110

    9×20

    ACL-540-0.026

    220

    540

    4.4

    0.026

    33

    290

    180

    300

    200

    130

    10×20

    ACL-625-0.022     

    250

    625

    4.4

    0.0224

    34

    300

    200

    300

    200

    130

    10×20

    ACL-700-0.02


    280

    700

    4.4

    0.0224

    44

    330

    220

    300

    180

    130

    10×20

    ACL-800-0.017

    D

    315

    800

    4.4

    0.0175

    47

    330

    240

    320

    180

    130

    12*20

    ACL-1000-0.014   

    380

    1000

    4.4

    0.014

    60.5

    330

    255

    320

    180

    130

    12*20

    ACL-1200-0.011

    500

    1200

    4.4

    0.0117

    74

    360

    240

    350

    310

    190

    Ф13

    ACL-1600-0.008

    630

    1200

    4.4

    0.0088

    95

    390

    300

    380

    310

    190

    Ф13

    备注:以上为我司标准规格,特殊规格可根据客户要求定制.参数如有变动恕不另行通知!

    Remarks: The above are our standard specifications, special specifications can be customized according to customer requirements. Parameters are subject to change without notice!